AC-MX44-AUHD-HDBT: 18Gbps 4x4 Matrix

As of May 2021
This Product has been Discontinued and Replaced with AC-MX-44HDBT

AC-MX44-AUHD-HDBT

18Gbps True 4K60 4:4:4, 4x4 Matrix with four HDBaseT inputs as well as four mirrored HDMI outputs.

18Gbps Uncompressed Bandwidth Support on HDMI
18 Gbps with ICT on HDBaseT outputs
Audio Extraction, EDID management, IR, RS-232 and LAN control
Built in Scaling, Test Patterns and Audio Delay

Description

Application

Specifications

Resources

Gallery

Compatible with

Description

This 4x4 Matrix Switcher has dual outputs with HDMI & HDBaseT

The AC-MX44-AUHD-HDBT is a true 4x4 HDMI/HDBaseT matrix switch. This unit includes 4 HDMI inputs, and 4 HDMI/HDBaseT output blocks. These output blocks include a HDBaseT and HDMI port, these ports are mirrored, and both are active. This Matrix supports HDMI 2.0(a/b), HDCP 2.3, up to 4K video resolution, and up to 18 Gbps bandwidth. We are able to pass 18Gbps through category cable by using the new HDBaseT technology we have developed called "ICT", learn more about ICT below. This switch allows any source (Blu-ray, UHD Blu-ray, satellite receiver, game consoles, PCs, etc ... ) to be shown on any of the connected displays. This matrix equalizes and amplifies the output to ensure the HDMI signal can be transmitted through long HDMI cables without loss of quality.

Audio Delay is “On-Board” so you can manage lip-sync issue before it is a problem. Also with built in Scalers you don't have to forfeit that 4K signal just because you have a couple older displays. All that with Full EDID management allows maximum flexibility with today's wide mixture of sources and displays.

This is an ideal solution for digital entertainment centers, HDTV retail, show sites, data centers, schools, conference and training centers and more!

Key Benefits of using the ac-mx44-auhd-hdbt

HDBaseT Compatibility Mode (HDBT-C) ~ This EXCLUSIVE AVPro Edge technology allows you to convert high bandwidth signals that are between 9 Gbps - 18Gbps like UHD Players, HDR Content, Gaming Systems, PC's, and Media Players. The conversion uses a proprietary algorithm that impacts the original image a little as possible so you can transmit your HDR and high bandwidth signals over long distance transmission to a display that supports 4K but does not support 18Gbps. Best of all, this is managed on a per output basis so you have complete control over what individual runs are "down-clocked"

ICT Technology on the HDBaseT Outputs ~ ICT(Invisible Compression Technology) is a revolution in HDMI extension technology. This proprietary technology can compress high bandwidth HDMI signals into a more manageable size to fit through a CAT Cable "pipe". The ICT algorithm can manage all flavors of HDR including 4:4:4, 4:2:2, and 4:2:0 as well as signals up to 18Gbps and 4K 60Hz 4:4:4. The architecture of ICT allows it to be compatible with all chroma subsampling types, color spaces and HDMI Deep Color up to 12 Bit. Our technology is unique because it is truly invisible. It is not only invisible to the human eye, it is invisible to HDMI test gear and other sink devices, what comes in is what goes out. What makes ICT special is that we preserve HDR Metadata and color information and depth in its full, original, integrity. Other compression technologies sacrifice these to save space and it will cause very visible banding, color shifting and motion artifacts in the image.

This technology is backed by extensive testing in side by side comparisons of ICT vs direct connected sources. The setup is two identical displays and a single source. The source is split and sent to both displays, one using ICT and one with an 18Gbps cable. The movie is shown in HDR and evaluators are brought into determine which one is compressed. The results are conclusive, it is invisible. Even to the most trained eye

4K Up/Down Scaling ~ Like other AVPro Edge Matrix Switchers this unit comes with scalers built in. You are able to Upscale at the HDMI output 1080p > 4K. With the HDBaseT outputs you are able to scale 4K>1080p. There are limitation to scaling with this unit, you are not able to downscale on the HDMI outputs, and you are not able to upscale on the HDBaseT outputs.

Extreme EDID Management ~ With 29 on board EDID's, including HDR EDID's, not getting a picture is simply a thing of the past. You can manage the input side of the switch by selecting a preloaded EDID. We also have the ability to INSTANTLY read an EDID from any connected display and apply it to the desired input, all with the push of a button. Goodbye EDID problems...

Dual Audio De-Embedding ~ NEW FOR 2017! Our unique Audio De-Embedding allows:

The user can extract 2 Channel PCM audio from each output (Balanced 5-Pin Terminal Block, pre-made conversion to L/R cables available). NOTE: the Analog Port only supports 2CH PCM - for down-mixing check out AC-ADM-AUHD or AC-ADM-COTO
It features 4 digital optical toslink outputs for with support for 7CH LPCM, Dolby Digital, Dolby Digital +, DTS, DTS Master Audio.
Extracted audio routing options include
1. Bind to output (extracted audio switches with the video, this is the default mode)
2. Bind to input (extracted audio is fixed to the corresponding input by the same number)
3. Independent (extracted audio can be routed however you like and there are commands to allow it to function as a separate matrix)

Audio Delay ~ With the AC-MX44-AUHD-HDBT you can manage audio delay on the balanced or digital outputs per output. This features up to 630ms of delay so your lip sync problems simply vanish. Audio delay can be managed directly from the front panel for ease of use and simple setup with the push of a button.

Built In Test Pattern ~ The unit features an internal test pattern that can be initialized to verify that the infrastructure after the Matrix is in tact. This saves hours of painful troubleshooting, and allows you to identify problems before they become problems. Pattern is per output.

Receiver Options ~ There are two receiver options:

AC-EX70-444-RNE (Recommended) - Supports full 18Gbps 4K & HDR up to 70 Meters and 100 Meters on 1080P
AC-EX70-UHD-R - Supports up to 4K 60 4:2:0 (10.2 Gbps) up to 40 Meters and 70 Meters on 1080P (Ideal for non high bandwidth systems)

Application

Matrix Switch Application

Definition - Matrix switchers provide the ability to route any input to any output or to multiple outputs at any time. Depending on the model, a matrix switcher can route HD, UHD or SUHD content in this manner. Additionally, since most venues have audio zones and video zones the requirement to breakout or strip off the audio in often necessary and has become almost a standard feature on matrix switchers.
Control – Matrix switchers are generally controlled via 3rd party controller like Control 4, RTI, Crestron and others. Many integrators want ready made drivers for their control system to make programming and deployment easier.
Who uses them? - At the heart of almost every custom install is a matrix switch to ease routing and distribution of signals throughout the install including Audio, Video and Control – so, you have a product that can compete on price, performance, compatibility, and control.
Matrix Switchers are used widely in both Commercial and Residential Applications

*For maximum performance use our AC-EX70-444-RNE HDBaseT Receivers

This matrix is utilizing ICT on each of it's HDBaseT outputs, so in order to get the full bandwidth signal you need to use our AC-EX70-444-RNE's. This HDBaseT Rx is the ideal receiver, and was built and designed to work specifically with AVPro Edge's HDBaseT matrix switchers. This receiver includes RS-232 and IR control passthrough.

Specifications

Full Feature Set

HDMI 2.0(a/b)
18Gbps Uncompressed Bandwidth Support on HDMI
18Gbps wit ICT on HDBaseT outputs
4K60 4:4:4 Support
Full HDR Support (HDR 10 & 12 Bit)
Dolby Vision, HDR10+ and HLG Support
HDCP 2.3 (and all earlier versions supported)
1080p > 4K Up Scaling on HDMI outputs
4K > 1080P Down Scaling on HDBaseT outputs
Advanced EDID Management
IR, RS-232 and LAN Control Options
Digital Toslink Out (7CH PCM, DD, DTS)
Balanced Analog Out (2CH PCM)
Audio Delay for Digital & Analog Out
HDBaseT Compatibility mode for mixed systems! (More below)
Driver Support for Crestron, C4, RTI, ELAN and more!!!
Extracted Audio Now Supports DD+, DTS Master Audio on Toslink
Extracted Audio Now Has 3 Operating Modes. Bound to Input, Bound to Output, or Independent Matrix
Built in Test Pattern on Each Output to Verify Infrastructure

What's in the box?

AC-MX44-HDBT-AUHD (Matrix Switch)
48v Power Supply
1 x IR Remote Control
Rack Ears
4 5-Pin Terminal Blocks
2 3-Pin Terminal Blocks
5-Pin to 2ch Audio Extraction Cable

Specifications

Resources

Welcome to AVPro Edge’s Resources

We do our very best at making sure the installation of our products goes smoothly. You will find buttons to the left of this text that will link you directly to what you need in order to make that happen. Whether it be a manual, driver or control codes we have you covered. Using these resources will ensure you have the information at your finger tips when needed. Feel free to reach out to us at info@avproglobal.com and we will be sure to follow up with whatever your needs are. If you would like to talk to an AVPro Tech specialist please click “support” from the websites top menu.

Thanks,

The AVPro Edge Team

Gallery