|
Fresco Video SystemsFresco Video Systems is delivering rock solid video manipulation products such as video wall processors, synced distribution amplifiers and multi-view picture and picture processors. We can take an HDMI audio video signal and do so much with it - split it, scale it, flip it - whatever your choice Fresco has your solution. We offer video wall alternatives where you can use low cost displays, alongside distribution amplifiers built to sync high end commercial displays. And best of all you still get the 4K 18Gbps video distribution you come to know from AVPro Edge technology. |
2x2 Video wall to a 40x40 video wall, fresco has the solution
The Fresco 4 is a video wall processor able to handle 18Gbps 4K60 (4:4:4) through its 1 HDMI input and 4 HDMI outputs. Plug-and-play for a 4-panel video wall, or cascade multiple units for larger set ups. Easy to use and ready to go, the Fresco 4 from AVPro Edge gives you the stable video wall solution every integrator has been looking for. Directly out of the box you are able to connect a source and 4 displays for a plug-in-play video wall. AVPro Edge’s head of Application Engineering said it best:
John Tumbleson
|
"The biggest challenge to setting up a Fresco Video Wall is hanging the physical panels!" - John Tumbleson
|
More Fresco Solutions are coming out soon, for now check out our Fresco 4, Fresco DA 1x16 and our Video Flux below.
1 input, 4 output Expandable Video Wall Processor
AC-FRESCO-CAP-4 |
|
1 input, 16 output Distribution Amplifier
AC-FRESCO-DA116 |
|
FRESCO CUSTOM MOSAIC VIDEO WALL SOFTWARE (AC-FRESCO-PC)
|
Our engineers have been working hard create software that adds endless customizable options to our Fresco video wall controllers. This robust software can make any video wall layout possible in minutes! This allows users to manipulate the image to fit over almost any configuration of displays including the ability to separate and overlap the signal throughout any number of displays in any configuration.
|
|
How to use the software?
- Download and install the software
- Connect to the Fresco Video Wall Controller via serial via RS-232
- Open the software and select “Create a Project” and select the number of displays
- Arrange the Video Wall how you would like it
- Apply the setting and generate your video wall
