MXNet 1G 10 Port Network Switch

Description

The MXNet 10 Port Network Switch is the center from which all other MXNet Ecosystem platform components revolve. The AC-MXNET-SW10 (and AC-MXNET-SW24, AC-MXNET-SW48) packs a serious A/V performance punch with AVPro Edge’s proprietary design and engineering efforts. The AC-MXNET-SW10 includes a new AVPro developed network switch operating system (NOS) designed to reduce multicast processor loads and adds unique AVPro developed Intelligent A/V Processing (IAVP) technologies for more efficient multicast routing.

The AC-MXNET-SW10 Network Switch is only one part of the MXNet Ecosystem that includes Encoders, Network Switches, Control Processors, and other various components designed to facilitate building a custom A/V distribution system. MXNets Ecosystem includes formatting such as resolution scaling, complete EDID management, multifaceted video walls, and contains the MXNet MENTOR setup and control tool. MENTOR makes installations easy on the integrator while also presenting a major WOW factor for your client.

MXNet 1G 10 Port Network Switch

Product form
  • 8 port copper POE+ ports with 124 Watts of power available
  • 2x 1GB SFP fiber port for longer runs
  • Less than 2 seconds switching time
  • HDMI 2.0
  • HDCP 2.2

SKU: AC-MXNET-SW10

  • Shipped today? Order within: Mar 19, 2024 13:00:00 -0500

Description

The MXNet 10 Port Network Switch is the center from which all other MXNet Ecosystem platform components revolve. The AC-MXNET-SW10 (and AC-MXNET-SW24, AC-MXNET-SW48) packs a serious A/V performance punch with AVPro Edge’s proprietary design and engineering efforts. The AC-MXNET-SW10 includes a new AVPro developed network switch operating system (NOS) designed to reduce multicast processor loads and adds unique AVPro developed Intelligent A/V Processing (IAVP) technologies for more efficient multicast routing.

The AC-MXNET-SW10 Network Switch is only one part of the MXNet Ecosystem that includes Encoders, Network Switches, Control Processors, and other various components designed to facilitate building a custom A/V distribution system. MXNets Ecosystem includes formatting such as resolution scaling, complete EDID management, multifaceted video walls, and contains the MXNet MENTOR setup and control tool. MENTOR makes installations easy on the integrator while also presenting a major WOW factor for your client.
  • Key Benefits
  • Specs
  • Resources
  • In the Box

Fast Switching – Enjoy almost instant source-to-source switching to any receiving endpoint. On average, MXNet switches between the same timing and resolution sources in less than 2 seconds with zero black frames when the scaling setting is on.

 

Low Latency – The average latency time between audio and video onset is around 35ms. Anything 40ms or less is invisible to human eyes and ears. We tested latency thoroughly and found that different signal types can play a role in latency:

 

  • MXNet Point to Point (HDMI or Decoder Analog Out)
    • Less than or equal to 33MS or 1 Frame at 30hz
  • MXNet Encoder (Non-Downmixing/2CH PCM Only)
    • Less than or equal to 1MS
  • MXNet Encoder (AVDM)
    • Less than or close to 60MS
    • 60MS is achieved only when downmixing high bit rate audio (Dolby TrueHD or DTS Master Audio), usually less. Anything less than 100MS is considered unnoticeable.

 

IAVP (Intelligent A/V Processing) – We re-engineered and optimized every system module that impacts multicast processing. That includes a complete reworking of IGMP, Jumbo Frames, Spanning Tree, and multicast filtering.

 

MXNet NOS (Network Operating System) – Multicast CPU utilization has been entirely reworked, resulting in excellent efficiencies. Processor loads will never exceed 40% even when the switch is fully populated. System boot times take 1 min 45 sec from cold power up to full functionality, including POE device power-up.

 

(Note: This non-stackable version of our MXNet Switches does not have 10G SFP+ ports and can only send or receive one source on one 1G SFP port.)

Ports:
Physical port8 x 10/100/1000BaseT + 2 x GE Combo (GT/SFP)
Performace:
ConfigurationLayer 2
Switching Capacity128 Gbps
Forwarding rate42 Mpps
Jumbo Frame10K
MAC Address16K
ARP Table4K
Routing Table1K
ACL Table1K
Environmental:
Relative Humidity10%~90% non-condensing, storage 95%
TemperatureWorking 0°C~50°C, storage -40°C~70°C
Power:
Power SupplyAC:100~240VAC, 50~60Hz
Power Consumption<132W 
PoEIEEE 802.3af,IEEE 802.3at, Total PoE power: 124W
Dimensions:
Dimensions (Unit Only Height/Depth/Width) mm: 44.5 x 203.2 x 341.4
inch: 1.75 X 8 X 13.44
Dimensions 
(Packaged Height/Depth/Width) 
mm: 95.3 x 313.3 x 400
inch: 3.75 X 12.34 X 15.75
Weight (Unit)5.6 LBS/2.5 KG
Weight (Packaged)4 LBS/1.8 KG
RegulatoryCE/FCC/UL
Product Warranty10 Years
Specifications subject to change without notice.  Mass & dimensions are approximate
  • AC-MXNET-SW10 (Network Switch)
  • 1 x Grounding cable
  • 4 x Rubber Feet
  • 1 x RS232 to ethernet connector
  • Zip Ties
  • 2 x Mounting Brackets
  • 8 x Screws for Mounting Brackets

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
​For more information, go to www.P65Warnings.ca.gov.

Recently viewed products

Login

Forgot your password?

Don't have an account yet?
Become a Dealer