- Key Benefits
- Specs
- Resources
- In the Box
Processing Performance: A 680Gbps calculated switching capacity combined with a forwarding rate of 480Mpps signifies ample headroom for high data throughput and network efficiency.
Virtual Switch Framework: Synthesizes multiple AC-MXNET-10G-SW24C switches in the same layer into one logical device for high availability and scalability.
Carrier-Grade Build Rating: Carrier-Grade hardware and software design features high reliability and fail-safe redundancy capabilities for mission-critical applications, providing 99.999% uptime availability.
Fast Switching with Near-Zero Latency: Source-to-source switching to endpoints is virtually instantaneous if scaling is not required (100µs frame latency, or 1/150th of a frame). With scaling in use, the switching speed is between one to two frames, or about 17-34 milliseconds, considered visually imperceptible.
Preconfigured Comprehensive QoS: Quality of Service settings are optimized for Dante and SDVoE streams. Advanced load-balance configuration for SDVoE and MXnet applications optimize network performance by distributing high-volume data transfers and multicast streaming traffic across multiple paths to reduce congestion to optimize latency and other critical performance metrics.
Dante Audio Prioritized: AVPro is the first professional AV manufacturer to implement Dante-oriented QoS traffic prioritization to enhance network streaming performance in residential and commercial environments.
Class-Leading Performance: MXnet switches are the highest-performing switches in the AVoIP market segment.
| Ports: | |
| Ethernet | (24) × 10G-mGig RJ45 Ports RJ-45 Ports 1 through 8: POE++ Up to 60 Watts RJ-45 Ports 9-24: POE+ Up to 30 Watts (2) QSFP+ 40G Ports (1) × 10/100/1000BASE-T Management Port (MGMT) |
| HDMI | N/A |
| Audio | N/A |
| IR | N/A |
| RS232 | (1) × RJ45 console port (Out-of-Band) (9600 baudrate) |
| USB | (1) × USB 2.0 Type-A for MXnet Service and storage |
| Distance: | |
| Ethernet | 100 Meters/330 Feet over CAT5e |
| SFP+ and Fiber | 10G SFP+ AOC cable up to 3 meters, 10G SFP+ Multimode transceiver over Multimode fiber up to 550 meters 10G SFP+ Single mode transceiver over Single mode fiber up to 20 Kilometers |
| Environmental: | |
| Operating Temperature | 0°C ~ 50°C |
| Storage Temperature | -40°C ~ 70°C |
| Operating Humidity | 5%~95% noncondensing |
| Performance: | |
| Max SDVoE Endpoints | 24 (32 with QSFP+ 4x10G Hardware Profile Mode) |
| Switching Capacity | 680Gbps |
| Forwarding Rate | 480Mpps |
| MAC ADDRESS | 32K |
| Routing Table | 16K |
| Jumbo Frame | 16K |
| L3 Interface | 1K |
| Power: | |
| Max Power Consumption | 530W (1060W if using dual power supply) (2nd PSU Not Included) |
| POE Power | IEEE 802.3af (POE 15.4W) IEEE 802.3at (POE+ 30W) IEEE 802.3bt (POE++ 60W) (Only ports 1-8) Total POE Power Budget: 1000W |
| Thermal dissipation | 1812.176 BTU/hr |
| Power Supply Unit | AC: 100~240VAC, 50~60Hz DC: Input 48V-57V Up to two modular hot-swappable AC power supply units (only one PSU included with purchase) |
| Mounting | Rack mount |
| Dimensions: | |
| Height x Width x Depth (Single Unit) | Millimeters: 44 x 440 x 380 Inches: 1.73 x 17.32 x 14.96 |
| Height x Width x Depth (Packaged) | Millimeters: 161.9 x 463.55 x 558.8 Inches: 6.375 x 18.25 x 22 |
| Weight (Unit) | 12 lbs. (5.44 kg) |
| Weight (Packaged) | 16 lbs. (7.26 kg) |
| Regulatory | CE/FCC |
| Product Warranty | 10 Years |
| Specifications subject to change without notice. Mass & dimensions are approximate | |
Network Switch
- Power cable
- Rack screws and nuts
- Rack mount ears and screws
- Rubber feet
- Grounding wire
- Serial to RJ45 cable
