- Key Benefits
- Specs
- Resources
- In the Box
12 AUDIO INPUTS, 8 VIA POWER OVER CABLE (POC) - The AC-AEX-RC-HUB configuration features 12 audio inputs and 12 audio outputs with I/O connections using Toslink or analog RCA, with eight of the inputs uniquely designed for retrieving audio from sources located remotely from core system distribution components, via Power over Cable (PoC) Ethernet category cable. Distances up to 100m are possible with Unshielded Twisted Pair, extending to 130m when using Shielded Twisted Pair.
NOTE: An AVPro Edge AC-AEX-T Digital/Analog Audio Extender Transmitter (not included with the AC-AEX-RC-HUB) must be paired to each of these eight inputs for complete operation.
AC-AEX-T IN-RACK USE - Transmitters may also be placed in the system rack, connecting to the AC-AEX-RC-HUB with short RJ-45 jumpers for rack-based sources such as multi-output music streamers and satellite radio tuners. AC-AEX-T units will fit the AC-EZRACK-15 for a clean rack environment.
12 AUDIO OUTPUTS - Toslink signals are 2 CH PCM stereo (there is no multichannel downmixing) and analog signals are Left/Right stereo via RCA connectors. Signal is simultaneously output for both formats.
TV AUDIO FROM ARCHITECTURAL SPEAKERS - The AC-AEX-T transmitter may be inconspicuously placed behind the thinnest OLED, sending audio from TV-led apps or ATSC tuners back to the AC-AEX-RC-HUB for routing to the system, then passing on to architectural speakers in the TV location through system distribution components. No need for difficult to conceal mini-amplifiers, often unusable on certain TV brands, requiring more cable management.
EXPAND AUDIO OUTPUTS ON MANY AVPRO EDGE VIDEO MATRICES - System designs often consist of more audio-oriented areas than video destinations. Another interesting application for AC-AEX-RC-HUB is expansion of the audio outputs from a video matrix, such as the AVPro Edge Axion series, to 12 additional zones. Make audio from the big game available in areas where video is impractical.
AUDIO ADJUSTMENTS - 7 onboard pre-set EQ curves shape the sound as desired, plus output volume and Lt/Rt balance may be tailored to meet your needs.
| Audio: | |
| Mute | Available on all Outputs |
| Analog Input Voltage | 1Vrms, 2.3 Vp-p |
| Analog Output Voltage | 1Vrms, 2.828 Vp-p |
| Digital | 2 Channel PCM, Supported rates 32, 44.1, 48, 88.2, 96, 176, 192 kHz |
| Latency | 30ms |
| Control: | |
| Interfaces | RS-232, IP/LAN |
| Audio Inputs: | |
| AEX Audio | 8 |
| RCA | 4 |
| Digital (TOSLINK) | 4 |
| Audio Outputs: | |
| AEX Audio | 0 |
| RCA | 12 |
| Digital (TOSLINK) | 12 |
| Power: | |
| Power Consumption (Total) | 3 watts max |
| DC Power | DC 12V 2A |
| Dimensions: | |
| Dimensions (Single Unit Only HEIGHT/WIDTH/DEPTH) | MM: 44.45 x 444.5 x 234.95 INCH: 1.75 x 17.5 x 9.25 |
| Dimensions (Packaged HEIGHT/WIDTH/DEPTH) | MM: 127 x 571.5 x 381 INCH: 5 x 22.5 x 15 |
| Weight (Single Unit only) | 6.6 LBs (2.99 KG) |
| Weight (Packaged) | 9lbs (4.08KG) |
| *Specifications subject to change without notice. Mass & dimensions are approximate | |
- AC-AEX-RC-HUB (Audio Matrix Switching Hub)
- 12V/2A Locking Power Supply
- 1 x Three Pin Terminal Block
- 2 x Rack Mounting Brackets (attached)
- 4 x Rubber Feet and Screws
- 1 x Rack Grounding Wire
