AC-CX42-auhdThe four input, two output HDMI matrix switcher from ConferX
|
Description
Application
Specifications
Resources
Gallery
Compatible with
Description
The ConferX 4x2 Matrix is the ideal solution for any conference room, classroom or huddle space. This 4K switcher can display any of the four sources through both the HDBaseT and HDMI output port. Each of these outputs are completely independent of each other allowing to show two sources at the same time. With additional audio inputs and outputs, you will have not problems working with a microphone or intercom system. When you need a stable solution for video distribution, look to the entire line of ConferX products.
With two HDBaseT inputs this switch works alongside two ConferX Wall Plate Transmitters at the same time. You can have Mini DisplayPort, HDMI, VGA or USB-C inputs located up to 100 meters away from the AC-CX42-AUHD. This allows a teacher or presenter to use their laptop directly at the podium or presenters’ station without having to connect anything to the matrix switcher. The AC-CX42-AUHD gives any end user a simplified experience for sharing their ideas inside a classroom, conference room or huddle space.
Simple, intuitive and automatic control makes this unit the ideal "leave in the room" matrix. The unit features an "Auto" option where the it defaults to the last plugged in device or simple one button control for each output. Prefer a control system? No problem, with a built-in web-based GUI and a full set of control commands you can make this switch work for you.
With two HDBaseT inputs this switch works alongside two ConferX Wall Plate Transmitters at the same time. You can have Mini DisplayPort, HDMI, VGA or USB-C inputs located up to 100 meters away from the AC-CX42-AUHD. This allows a teacher or presenter to use their laptop directly at the podium or presenters’ station without having to connect anything to the matrix switcher. The AC-CX42-AUHD gives any end user a simplified experience for sharing their ideas inside a classroom, conference room or huddle space.
Simple, intuitive and automatic control makes this unit the ideal "leave in the room" matrix. The unit features an "Auto" option where the it defaults to the last plugged in device or simple one button control for each output. Prefer a control system? No problem, with a built-in web-based GUI and a full set of control commands you can make this switch work for you.
Key Features:
1) ULTRA HIGH DEFINITION: This unit supports 4K60 (4:4:4) 18Gbps signaling for today's modern office. As displays get larger and new PCs default to 4K resolutions, it’s imperative that your video distribution products are built to handle these high resolutions.
2) DISTANCE: By using any ConferX 100 meter wall plate transmitter or the AVPro Edge RNE receiver, the transmission distance for HD 1080P is 100 meters (330ft) & 4K is up to 70 meters (230ft) into the matrix! Additionally, go 100M on 1080P, 70M on 4K from the HDBaseT output to a display.
3) AUTO SENSING: This matrix is designed to be a "Set it & Forget it" piece of hardware. When the user plugs in their device (BYOD), the matrix automatically senses the signal and makes it active. If more than one input is in use, there is a simple button on the front to toggle inputs for each output.
4) CONTROL: Simple front panel control, a web-based GUI, IR and RS232 control is available.
5) POWER: The ConferX 4x2 is capable of powering both the HDBaseT transmitters as well as the HDBaseT receiver. This eliminates unnecessary power supplies and cleans up the look of your installation.
6) INTEROPERABILITY: Because this matrix switcher has an HDBaseT input and output, it is able to work alongside any standard HDBaseT equipment. Most importantly it can work with any of the HDBaseT transmitters or receivers from AVPro Edge & ConferX
2) DISTANCE: By using any ConferX 100 meter wall plate transmitter or the AVPro Edge RNE receiver, the transmission distance for HD 1080P is 100 meters (330ft) & 4K is up to 70 meters (230ft) into the matrix! Additionally, go 100M on 1080P, 70M on 4K from the HDBaseT output to a display.
3) AUTO SENSING: This matrix is designed to be a "Set it & Forget it" piece of hardware. When the user plugs in their device (BYOD), the matrix automatically senses the signal and makes it active. If more than one input is in use, there is a simple button on the front to toggle inputs for each output.
4) CONTROL: Simple front panel control, a web-based GUI, IR and RS232 control is available.
5) POWER: The ConferX 4x2 is capable of powering both the HDBaseT transmitters as well as the HDBaseT receiver. This eliminates unnecessary power supplies and cleans up the look of your installation.
6) INTEROPERABILITY: Because this matrix switcher has an HDBaseT input and output, it is able to work alongside any standard HDBaseT equipment. Most importantly it can work with any of the HDBaseT transmitters or receivers from AVPro Edge & ConferX
Application
Diagrams:
Specifications
Full Feature Set
Whats in the box?
|
Specifications
|
Resources
Welcome to AVPro Edge’s Resources
We do our very best at making sure the installation of our products goes smoothly. You will find buttons to the left of this text that will link you directly to what you need in order to make that happen. Whether it be a manual, driver or control codes we have you covered. Using these resources will ensure you have the information at your finger tips when needed. Feel free to reach out to us at info@avproglobal.com and we will be sure to follow up with whatever your needs are. If you would like to talk to an AVPro Tech specialist please click “support” from the websites top menu. Thanks, The AVPro Edge Team |
Gallery
Compatible with
HDBASET Inputs
HDBASET Outputs

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov.
For more information, go to www.P65Warnings.ca.gov.